Use VoIP services in Juniper with Axivox

Introduction

Juniper VoIP can be set up to work together with Axivox. In that case, an Asterisk server is not necessary as the infrastructure is hosted and managed by Axivox.

To use this service, contact Axivox to open an account. Before doing so, verify that Axivox covers your area and the areas you wish to call.

Configuration

Go to Apps and install the VoIP Module.

Go to Settings ‣ General Settings ‣ Integrations, and fill out the Asterisk (VoIP) field:

• PBX Server IP: set the domain created by Axivox for your account (e.g., yourcompany.axivox.com)

• WebSocket: type in wss://pabx.axivox.com:3443

• VoIP Environment: set as Production

Configure the VOIP user in the Juniper’s user

Go to Settings ‣ Users & Companies ‣ Users, then open the user’s form you want to configure. Under the Preferences tab, fill out the section PBX Configuration:

• SIP Login / Browser’s Extension: the Axivox username

• SIP Password: the Axivox SIP Password

Note

You can find all this information by logging in at https://manage.axivox.com/, selecting the user you want to configure, and referring to the fields as pictured below.

Phone Calls

You can make phone calls by clicking on the phone icon in the navigation bar.

You can also receive phone calls. Juniper rings and displays a notification.

Note

Your number is the one provided by Axivox.

Tip

If you see a Missing Parameter message in the Juniper softphone, refresh your Juniper window and try again.

Tip

If you see an Incorrect Number message in the Juniper softphone, make sure to use the international format, leading with the plus (+) sign followed by the international country code. E.g., +16506913277 (where +1 is the international prefix for the United States).